Popular keywords search: glass tempering furnace, double curved tempering furnace, forced convection tempering furnace, flat bending tempering furnace, super-large tempering furnace
Address: Huimeng Town, Mengjin County, Luoyang City, Henan Province, China
发表时间：2019/3/3 2:06:38 Article Author: admin Published: 2019/3/3 2:06:38
优点 First, advantages
采用顶置高效循环热风机分体设计 1.Separate design using overhead high efficiency circulating heat fan
冷却钢化风机一大一小配置，节能高效。 2. Large and small configurations of cooling and tempering fans, energy saving and high efficiency.
耐高温、抗氧化优质不锈钢材质的对流系统 3.Convection system of high temperature resistant and oxidation resistant high quality stainless steel
洁净高效、不易变形、使用寿命长。 4, clean and efficient, not easy to deform, long service life.
智能吹风设计，独有通过段设计，薄厚板通吃（ 3.5mm-19mm ） , 从根本上解决了传统通过段做厚板做不好的弊端，真正实现了南北炉子完美结合。 5. Intelligent hair dryer design, unique pass section design, thin and thick plate take-all ( 3.5mm-19mm ) , which fundamentally solves the disadvantages of traditional thick plates that are not good through sections, and truly realizes the perfect combination of North and South stoves.
可钢化玻璃类型 Type of temperable glass
离线 2 、在线 LOW-E 玻璃 3 、超白玻璃 4 、丝网印刷玻璃 5 、压花玻璃 6 、着色玻璃 7 、白玻 1. Offline 2. Online LOW-E glass 3. Ultra-clear glass 4. Screen-printed glass 5. Patterned glass 6. Stained glass 7. White glass
主要参数表 Third, the main parameter table
1 、表中数据按照 5 毫米白玻、 100% 装载率计算；实际数据随玻璃品种、规格大小和装载情况而有所变化，届时以供需双方约定为准。 Note: 1. The data in the table is calculated according to 5mm white glass and 100% loading rate; the actual data will vary with the glass type, size and loading situation, and then subject to the agreement between the supply and demand parties.
其他型号限于篇幅未全部罗列 2.Other models are not listed in length
本公司保留技术更新后变更相关参数之权利 3. The company reserves the right to change related parameters after technology update
AT-TAQ glass tempering furnace is mainly used for processing glass products supporting industries such as construction, furniture, home appliances, decoration, and automobiles.
Fourth, the operating points
1. The forced convection tempering furnace must not switch the working mode during the production process. This may cause serious working logic errors and cause the state of the glass to be lost. The glass will not be released in the furnace.
钢化炉绝对不可以在多工位的时候使用长度差较大的玻璃来工作，这样将可能导致玻璃位置在炉子里出现错乱，导致出炉位置波动过大，一般尺寸控制在50mm范围内。 2. The forced convection tempering furnace must not work with glass with a large length difference when working in multiple stations. This may cause the position of the glass to be disordered in the furnace, resulting in excessive fluctuations in the firing position. The general size is controlled in the 50mm range. Inside. If you choose a new specification, you must wait for all the products of the previous specification to be released before the next production.
钢化炉检修的时候务必将设备转入系统待机模式，这样设备部分动作还可以手动控制，但是系统不会自动运行生产流程的自动连续性动作。 3. During the maintenance of the forced convection tempering furnace, it is necessary to put the equipment into the system standby mode, so that some of the equipment's actions can also be manually controlled, but the system will not automatically run the automatic continuous action of the production process.
强制对流 钢化炉进行系统维修时必须做好安全保护工作，在重要部门必备的时候可以按下急停按钮或者将电源切断。 4. Forced convection furnaces must perform safety protection when performing system maintenance. When necessary for important departments, they can press the emergency stop button or cut off the power supply.
Previous: No more!
Next: No more!