Popular keywords search: glass tempering furnace, double curved tempering furnace, forced convection tempering furnace, flat bending tempering furnace, super-large tempering furnace
Address: Huimeng Town, Mengjin County, Luoyang City, Henan Province, China
发表时间：2019/3/3 1:59:44 Article Author: admin Published: 2019/3/3 1:59:44
优点 First, advantages
、数倍于常规设备的炉长和风栅，可以使玻璃在单向运动中被加热到可钢化温度，并被迅速钢化、冷却； 1. Several times longer than the furnace length and wind grill of conventional equipment, the glass can be heated to temperable temperature in one-way movement, and can be rapidly tempered and cooled;
、灵活的速度曲线调控，适应不同时段的玻璃物理状态； 针对不同规格的玻璃，可设定逻辑伺服控制连续生产模式和纯连续生产模式； 2. Flexible speed curve adjustment to adapt to the physical state of the glass at different time periods. For the glass of different specifications, a logical servo control continuous production mode and a pure continuous production mode can be set;
、生产过程中风机持续有效工作，节能效果明显； 3. The fan continues to work effectively during the production process, and the energy saving effect is obvious;
、加热、冷却过程无需往复摆动，明显减少白雾、划伤、波浪等品质缺陷； 4. There is no need to swing back and forth during heating and cooling, which obviously reduces quality defects such as white fog, scratches and waves;
、连续钢化工艺，产量倍增，适用于加工大批量的建筑家俬、家电、汽车、太阳能等产业玻璃。 5 , continuous tempering process, doubled output, suitable for processing large quantities of construction furniture, home appliances, automobiles, solar energy and other industrial glass.
可钢化玻璃类型 Type of temperable glass
离线 2 、在线 LOW-E 玻璃 3 、超白玻璃 4 、丝网印刷玻璃 5 、压花玻璃 6 、着色玻璃 7 、白玻 1. Offline 2. Online LOW-E glass 3. Ultra-clear glass 4. Screen-printed glass 5. Patterned glass 6. Stained glass 7. White glass
主要参数表 Third, the main parameter table
1 、表中数据按照 5 毫米白玻， 100% 装载率计算；实际数据随玻璃品种、规格大小和装载情况而有所变化，届时以供需双方约定为准； Note: 1. The data in the table is calculated according to 5mm white glass and 100% loading rate; the actual data will vary with the glass variety, size and loading situation, and then subject to the agreement between the supplier and the demand
2.Other models are not listed in length
3. The company reserves the right to change related parameters after technology update
操作要点 Fourth, the operating points
1. The continuous glass tempering furnace must never switch the working mode during the production process. This may cause serious working logic errors, cause the state of the glass to be lost, and the glass will not be released in the furnace.
2. A continuous glass tempering furnace must not work with glass with a large length difference in multiple stations. This may cause the position of the glass to be disordered in the furnace, resulting in excessive fluctuations in the furnace position. The general size is controlled in the 50mm range. Inside. If you choose a new specification, you must wait for all the products of the previous specification to be released before the next production.
3. When the continuous glass tempering furnace is overhauled, the equipment must be switched to the system standby mode, so that some of the equipment's actions can also be manually controlled, but the system will not automatically run the automatic continuous action of the production process.
4. The continuous glass tempering furnace must perform safety protection when performing system maintenance. When an important department needs it, it can press the emergency stop button or cut off the power supply.
Previous: No more!
Next: No more!